The EATON ULDF6000PR is a loop connected passive repeater panel for ULDF6000 panels. A repeater displays system information at further locations, ideal for large sites where security or management must follow alarms away from the main panel.
In short
- Type: Loop Connected Passive Repeater Panel.
- No programming required (except local text information), per the catalogue.
- Multi-language capability.
- Ingress protection: IP30.
- Within the UL listing for control unit accessories (S24988).
How the repeater works
It connects to the main panel’s signalling loop and shows the system status as on the panel.
Technical data
| Item | Value |
|---|---|
| Model | ULDF6000PR |
| Type | Loop Connected Passive Repeater Panel |
| IP rating | IP30 |
| Compatible with | ULDF6000 |
The critical point: compatibility
The repeater works only with Eaton ULDF6000 panels; the connection method (loop or network) decides the model.
Installation steps
- Locate the repeater where staff monitor alarms.
- Connect it to the signalling loop per Eaton instructions.
- Test that alarms and faults from the main panel appear on it.
Common mistakes
- Choosing a model that does not suit the available connection.
- Do not use high-voltage insulation testers while devices or the panel are connected, as the Eaton datasheets warn.
Inspection and maintenance
Before any test or maintenance, notify the owner, the monitoring station and everyone affected, as testing may operate alarms or linked outputs. The owner is responsible for inspection, testing and maintenance per NFPA 72 and the authority having jurisdiction, preferably by a qualified company.
Files and ordering
The EATON UL range catalogue is in the files section. When ordering, state the model ULDF6000PR.
How to order
Use the “Build your order” section on this page: add every model and quantity, then send the whole order by email or WhatsApp. It reaches us as a tidy PDF request sheet and we contact you with the quotation.
FAQ
Does it need programming?
Per the catalogue no programming is required, except local text information.
ULDF6000PR vs ULDPTR6000?
The first connects to the loop; the second is a touchscreen on the network with integral power.
References
- EATON ULDF6000 — Datasheet (attached)
- UL 864 — Control Units and Accessories for Fire Alarm Systems
- NFPA 72 — National Fire Alarm and Signaling Code
This page is general information to help with selection and ordering, taken from the attached EATON datasheet. Final design is set by the project’s approved designer; the project specification, the consultant’s drawings and the latest datasheet revision govern.
