Skip to content
Exclusive agent of MECH products in Saudi Arabia
Store Request a quote

MECH OS&Y GATE VALVE MECHANICAL JOINT UL RED MODEL XZ31X

Model XZ31X

Connection ends
Mechanical joint × mechanical joint (MJ × MJ)
Working pressure
300 psig (2068 kPa); also listed at 250 / 200 psig
Approvals
UL
Listed models
XZ31X, Z31X-300
Sizes
2" – 12"
Request a quote for this product
Or buy from the online store
PROJECT APPROVALS

Approved on projects

98 projects and 61 owners approved this product or its family through the project consultants.

and 86 more projects.

Original approval letters are provided on request with your submittal.

The MECH os&y gate valve mechanical joint ul red, model XZ31X, sizes 2″ – 12″, working pressure 300 psig (2068 kPa); also listed at 250 / 200 psig, UL approved. A rising-stem gate valve whose position is visible at a glance: stem out means open. This guide explains what it does and how it works, related models, technical data, the critical point in selection and installation, and common mistakes. For more, read the guide OS&Y vs NRS gate valves.

At a glance

  • An OS&Y (outside screw and yoke) gate valve lifts a gate inside the body with an external threaded stem running through a yoke.
  • Sizes 2″ – 12″.
  • Working pressure 300 psig (2068 kPa); also listed at 250 / 200 psig.
  • Approvals: UL.
  • Connection: Mechanical joint × mechanical joint (MJ × MJ).

OS&Y gate valve: what it does and how it works

An OS&Y (outside screw and yoke) gate valve lifts a gate inside the body with an external threaded stem running through a yoke. When opened the stem rises above the handwheel, so the valve position can be seen from a distance without a separate indicator.

Fully open, the gate is clear of the waterway, so pressure loss is very low. It is used as a control valve in valve rooms and on main supplies above ground, and takes a supervisory switch mounted on the yoke.

Related models

OS&Y gate valve family
ModelProductSizesPressureApprovals
XZ31X — this productOS&Y GATE VALVE MECHANICAL JOINT UL RED2″ – 12″300 psigUL
XZ01XOS&Y GATE VALVE FLANGE x MECHANICAL JOINT UL RED2″ – 12″300 psigUL
Z51XGATE VALVE OS&Y FLANGE X GROOVE UL/FM RED2″ – 12″ (DN50 – DN300)300 PSIUL / FM
XZ81XOS&Y GATE VALVE GROOVED RED UL/FM2″ – 12″ (DN50 – DN300)300 PSIUL / FM
XZ41XOS&Y GATE VALVE FLANGE RED UL/FM2.5″ – 24″ (DN65 – DN600)300 PSIUL / FM

Technical data

Specification of model XZ31X
ItemSpecification
Connection endsMechanical joint × mechanical joint (MJ × MJ)
Working pressure300 psig (2068 kPa); also listed at 250 / 200 psig
ApprovalsUL
Listed modelsXZ31X, Z31X-300
Sizes2″ – 12″

Clearance above the valve

Because the stem rises on opening, the valve needs headroom equal to its fully-open height. Check the open height in the size table before fixing its position; where headroom is limited or the valve is buried, an NRS valve is the choice.

Caution

A control valve must be supervised (switch, lock or seal per the standard). Fit the OS&Y supervisory switch and wire it to the panel.

Installation steps

  1. Check the end type and flange, groove or mechanical-joint standard for the model.
  2. Install with the stem vertical and upward where possible, leaving full stem rise clearance.
  3. Support the valve and adjacent pipe so the line weight is not carried by the valve.
  4. Cycle fully open and shut, then fit and adjust the supervisory switch.

Common mistakes

  • No clearance left for stem rise.
  • Leaving the valve unsupervised.
  • Coating the stem with paint during site painting or lubricating it with unsuitable products.

Files and ordering

On this page: MECH Fire Protection Valves Catalogue (UL/FM), Material Safety Data Sheet (MSDS). Add the product to your request list with size and quantity and we send a quotation, or build a submittal PDF for the consultant. Fu-Mech is the exclusive MECH agent in Saudi Arabia.

Frequently asked questions

What is the difference between OS&Y and NRS?

On an OS&Y the stem rises, so position is visible and headroom is needed; on an NRS it does not, suiting limited space and burial with an indicator post. See OS&Y vs NRS gate valves.

How do I know the valve is open?

If the stem stands fully out above the handwheel, the valve is open.

What is the working pressure of model XZ31X?

300 psig (2068 kPa); also listed at 250 / 200 psig per the product data. The pressure for each size or listed model is in the size table and datasheet.

What approvals does it carry?

UL per the product data. Check the size and listed model in the approval listings, and see how to verify UL and FM approvals.

What end connection does it have?

Mechanical joint × mechanical joint (MJ × MJ). Choose the connection that matches the adjacent pipe and fittings.

References

  • MECH catalogue — Fire fighting valves

This guide is general information to help with selection. Figures come from the product data on this page and the MECH catalogue; final design is by the project’s approved designer to the applicable standards and the project specification.