Skip to content
Exclusive agent of MECH products in Saudi Arabia
Store Request a quote

MECH AIR RELEASE VALVE MODEL: ARVX

Model ARVX

Connection ends
Thread ASME B1.20.1
Working pressure
300 PSI
Temperature
0 – 80 °C
Coating
FBE — ANSI/AWWA C550
Sizes
1/2" – 1-1/2" (DN15 – DN40)
Request a quote for this product
Or buy from the online store
SIZES & DIMENSIONS

Sizes & dimensions

SizeDNA (NPT)B (mm)C (mm)D (NPT)
1/2"DN151/2-14NPT1571153/8-18NPT
3/4"DN203/4-14NPT1571153/8-18NPT
1"DN251-11.5NPT1571153/8-18NPT
1-1/4"DN321-1/4-11.5NPT1571153/8-18NPT
1-1/2"DN401-1/2-11.5NPT1571153/8-18NPT
PROJECT APPROVALS

Approved on projects

98 projects and 61 owners approved this product or its family through the project consultants.

and 86 more projects.

Original approval letters are provided on request with your submittal.

The MECH air release valve, model ARVX, sizes 1/2″ – 1-1/2″ (DN15 – DN40), working pressure 300 PSI. It automatically vents air collected at high points of the system. This guide explains what it does and how it works, related models, technical data, the critical point in selection and installation, and common mistakes.

At a glance

  • An air release valve has an internal float: when air collects, the water level drops, the float falls and opens the orifice to vent the air; the water then rises and the float closes it.
  • Sizes 1/2″ – 1-1/2″ (DN15 – DN40).
  • Working pressure 300 PSI.
  • Connection: Thread ASME B1.20.1.
  • Operating temperature: 0 – 80 °C.

Air release valve: what it does and how it works

An air release valve has an internal float: when air collects, the water level drops, the float falls and opens the orifice to vent the air; the water then rises and the float closes it.

Trapped air causes noise, water hammer and corrosion and reduces flow, so the valve is fitted at system high points and at the top of risers.

Technical data

Specification of model ARVX
ItemSpecification
Connection endsThread ASME B1.20.1
Working pressure300 PSI
Temperature0 – 80 °C
CoatingFBE — ANSI/AWWA C550
Sizes1/2″ – 1-1/2″ (DN15 – DN40)

Dimensions for every size are in the size table at the top of the page.

Where to install it

Install it at the highest point of the line where air collects, vertically, with an isolating valve beneath it for maintenance.

Caution

Do not install it tilted or on a horizontal run away from the high point, or it will not work.

Installation steps

  1. Identify system high points from the drawings.
  2. Fit an isolating valve, then the air release valve vertically above it.
  3. Direct the outlet to a safe place or pipe it to drain as needed.
  4. Inspect and clean it periodically.

Common mistakes

  • Installing it away from a high point.
  • No isolating valve for maintenance.
  • Installing it tilted.

Files and ordering

On this page: Product datasheet, MECH Fire Protection Valves Catalogue (UL/FM), Material Safety Data Sheet (MSDS). Add the product to your request list with size and quantity and we send a quotation, or build a submittal PDF for the consultant. Fu-Mech is the exclusive MECH agent in Saudi Arabia.

Frequently asked questions

Why does air collect in the system?

From initial filling and air dissolved in the water; it gathers at high points.

Does it need maintenance?

Periodic inspection and cleaning so the float does not stick.

What is the working pressure of model ARVX?

300 PSI per the product data. The pressure for each size or listed model is in the size table and datasheet.

What end connection does it have?

Thread ASME B1.20.1. Choose the connection that matches the adjacent pipe and fittings.

References

  • ASME B1.20.1 — Pipe Threads, General Purpose, Inch (NPT)
  • AWWA C550 — Protective Interior Coatings for Valves and Hydrants
  • MECH catalogue — Product datasheet

This guide is general information to help with selection. Figures come from the product data on this page and the MECH catalogue; final design is by the project’s approved designer to the applicable standards and the project specification.