Skip to content
Exclusive agent of MECH products in Saudi Arabia
Store Request a quote

MECH GATE VALVE OS&Y FLANGED BLUE | Model: XZ41X

National Water Company logo
Approved by the National Water Company Gate valves — sizes 50 – 300 mm · Certificate 2026-37271-02 · valid to Nov 2028
View certificate

Model XZ41X

Design standard
AWWA C515
Connection ends
Flange ASME B16.1 CL125
Working pressure
300 PSI
Temperature
0 – 80 °C
Coating
FBE — ANSI/AWWA C550
Sizes
2" – 24" (DN50 – DN600)
Request a quote for this product
Or buy from the online store
SIZES & DIMENSIONS

Sizes & dimensions

SizeDNL Length (mm)H1 Height (closed) (mm)H2 Height (open) (mm)D Flange diameter (mm)D1 Bolt circle (mm)C Flange thickness (mm)n-ΦL Bolt holes
2"DN50178348400152120.7164-Φ19.1
2.5"DN65190373440178139.717.54-Φ19.1
3"DN80203408490191152.419.14-Φ19.1
4"DN100229471573229190.519.18-Φ19.1
5"DN125254541665254215.919.18-Φ22.2
6"DN150267601755279241.319.18-Φ22.2
8"DN200292774975343298.522.28-Φ22.2
10"DN250330939119340636223.812-Φ25.4
12"DN30035610651370483431.825.412-Φ25.4
14"DN35038114151780528476.325.412-Φ28.6
16"DN40040613851790592539.825.416-Φ28.6
18"DN45043218352290635577.925.416-Φ31.8
20"DN5004571830238071063528.620-Φ31.8
24"DN60050820302830836749.330.120-Φ34.9
PROJECT APPROVALS

Approved on projects

17 projects and 11 owners approved this product or its family through the project consultants.

and 5 more projects.

Original approval letters are provided on request with your submittal.

The MECH gate valve os&y flanged blue, model XZ41X, sizes 2″ – 24″ (DN50 – DN600), working pressure 300 PSI. An OS&Y gate valve for water networks with a resilient seat. This guide explains what it does and how it works, related models, technical data, the critical point in selection and installation, and common mistakes. For more, read the guide OS&Y vs NRS gate valves.

At a glance

  • An OS&Y (outside screw and yoke) gate valve lifts a gate inside the body with an external threaded stem running through a yoke.
  • Sizes 2″ – 24″ (DN50 – DN600).
  • Working pressure 300 PSI.
  • Connection: Flange ASME B16.1 CL125.
  • Operating temperature: 0 – 80 °C.

OS&Y gate valve: what it does and how it works

An OS&Y (outside screw and yoke) gate valve lifts a gate inside the body with an external threaded stem running through a yoke. When opened the stem rises above the handwheel, so the valve position can be seen from a distance without a separate indicator.

This model is for water networks (blue) and designed to AWWA C515 for resilient-seated gate valves.

Technical data

Specification of model XZ41X
ItemSpecification
Design standardAWWA C515
Connection endsFlange ASME B16.1 CL125
Working pressure300 PSI
Temperature0 – 80 °C
CoatingFBE — ANSI/AWWA C550
Sizes2″ – 24″ (DN50 – DN600)

Dimensions for every size are in the size table at the top of the page.

Clearance above the valve

Because the stem rises on opening, the valve needs headroom equal to its fully-open height. Check the open height in the size table before fixing its position; where headroom is limited or the valve is buried, an NRS valve is the choice.

Caution

Leave stem-rise clearance and do not use the valve to throttle flow; it is for full open or full shut.

Installation steps

  1. Check the end type and flange, groove or mechanical-joint standard for the model.
  2. Install with the stem vertical and upward where possible, leaving full stem rise clearance.
  3. Support the valve and adjacent pipe so the line weight is not carried by the valve.
  4. Cycle fully open and shut, then fit and adjust the supervisory switch.

Common mistakes

  • No clearance left for stem rise.
  • Leaving the valve unsupervised.
  • Coating the stem with paint during site painting or lubricating it with unsuitable products.

Files and ordering

On this page: Product datasheet, MECH Water Valves Catalogue, Material Safety Data Sheet (MSDS). Add the product to your request list with size and quantity and we send a quotation, or build a submittal PDF for the consultant. Fu-Mech is the exclusive MECH agent in Saudi Arabia.

Frequently asked questions

What is the difference between OS&Y and NRS?

On an OS&Y the stem rises, so position is visible and headroom is needed; on an NRS it does not, suiting limited space and burial with an indicator post. See OS&Y vs NRS gate valves.

How do I know the valve is open?

If the stem stands fully out above the handwheel, the valve is open.

What is the working pressure of model XZ41X?

300 PSI per the product data. The pressure for each size or listed model is in the size table and datasheet.

What end connection does it have?

Flange ASME B16.1 CL125. Choose the connection that matches the adjacent pipe and fittings.

References

  • ASME B16.1 — Gray Iron Pipe Flanges and Flanged Fittings
  • AWWA C550 — Protective Interior Coatings for Valves and Hydrants
  • AWWA C515 — Reduced-Wall, Resilient-Seated Gate Valves for Water Supply Service
  • MECH catalogue — Fire fighting valves

This guide is general information to help with selection. Figures come from the product data on this page and the MECH catalogue; final design is by the project’s approved designer to the applicable standards and the project specification.