Skip to content
Exclusive agent of MECH products in Saudi Arabia
Store Request a quote

WINTER SPRINKLER PRESSURE GAUGE | MODEL: PFE

Model PFE

Request a quote for this product
Or buy from the online store
Certificates & approvals

Ask us for this product's certificates.

The Winters winter sprinkler pressure gauge, model PFE, UL 393 listed / FM approved approved. A pressure gauge built for sprinkler systems, reading water or air pressure on valves and the network. This guide explains what it does and how it works, related models, technical data, the critical point in selection and installation, and common mistakes.

At a glance

  • The Winters PFE series sprinkler gauge is designed and approved for fire systems, fitted on alarm valves, valve rooms and pump sets to read water or air pressure.
  • Approvals: UL 393 listed / FM approved.
  • Connection: 1/4″ NPT bottom.

Sprinkler pressure gauge: what it does and how it works

The Winters PFE series sprinkler gauge is designed and approved for fire systems, fitted on alarm valves, valve rooms and pump sets to read water or air pressure.

Per the manufacturer it has a corrosion-resistant case, is UL 393 listed and FM approved, and comes in several ranges and scales (psi, kPa, bar).

Technical data

Specification of model PFE
ItemSpecification
ApplicationFire sprinkler systems — water or air
RangeSeveral ranges, e.g. 0 – 300 psi (water / air)
Dial3-1/2″
Connection1/4″ NPT bottom
ApprovalsUL 393 listed / FM approved
StandardASME B40.100

Choosing the range

Choose a range with working pressure around the middle third of the dial and a top above the test pressure. Water and air gauges differ in range; state the use when ordering.

Caution

Fit the gauge with a gauge valve (isolate and drain) so it can be removed or calibrated without draining the system.

Installation steps

  1. Fit the gauge valve, then the gauge on the 1/4″ NPT connection with suitable sealant.
  2. Tighten the gauge by its hex only, not the case.
  3. Turn the dial so it reads easily.
  4. Record readings after commissioning and at inspections.

Common mistakes

  • Tightening by the case and damaging it.
  • A range exceeded by the test pressure.
  • No gauge valve.

Files and ordering

Add the product to your request list with size and quantity and we send a quotation.

Frequently asked questions

Is it for water and air?

Yes, versions exist for water and air; state the use and range when ordering.

What approvals does it carry?

Per the manufacturer: UL 393 listed and FM approved.

What approvals does it carry?

UL 393 listed / FM approved per the product data. Check the size and listed model in the approval listings, and see how to verify UL and FM approvals.

What end connection does it have?

1/4″ NPT bottom. Choose the connection that matches the adjacent pipe and fittings.

References

  • UL 393 — Indicating Pressure Gauges for Fire-Protection Service
  • ASME B40.100 — Pressure Gauges and Gauge Attachments
  • Winters catalogue — Product datasheet

This guide is general information to help with selection. Figures come from the product data on this page and the Winters catalogue; final design is by the project’s approved designer to the applicable standards and the project specification.