Skip to content
Exclusive agent of MECH products in Saudi Arabia
Store Request a quote

The Jute

Request a quote for this product
Or buy from the online store
Certificates & approvals

Ask us for this product's certificates.

The Fu-Mech the jute. Natural fibre wound on threads with jointing paste to seal threaded joints. This guide explains what it does and how it works, related models, technical data, the critical point in selection and installation, and common mistakes.

At a glance

  • Jute (or hemp) is a natural fibre wound onto the male thread in the direction of tightening and covered with jointing paste, filling the gaps between threads to seal the joint.

Jute (thread sealing fibre): what it does and how it works

Jute (or hemp) is a natural fibre wound onto the male thread in the direction of tightening and covered with jointing paste, filling the gaps between threads to seal the joint. It is traditionally used on threaded iron water joints.

This is an initial overview; detailed specifications of the supplied product (weight, packing) will be added once confirmed.

Technical data

Detailed specifications are in the datasheet on this page, or ask us for them.

Amount and wrap direction

Wrap jute in the direction of tightening and in moderation; too much prevents full make-up and can split the fitting, too little does not seal.

Caution

Use jute with a jointing paste suitable for the fluid, and check potable-water requirements on your project.

Installation steps

  1. Clean the male thread.
  2. Wind a thin layer of jute in the direction of tightening.
  3. Apply paste over the jute.
  4. Make up the joint and test it.

Common mistakes

  • Winding against the direction of tightening.
  • Too much fibre preventing make-up.
  • Using it without paste.

Files and ordering

Add the product to your request list with size and quantity and we send a quotation.

Frequently asked questions

Is it used with PTFE tape?

Normally one or the other: jute with paste, or PTFE tape.

Where is it used?

On threaded iron water pipe joints.

References

  • Fu-Mech catalogue — Product datasheet

This guide is general information to help with selection. Figures come from the product data on this page and the Fu-Mech catalogue; final design is by the project’s approved designer to the applicable standards and the project specification.