Skip to content
Exclusive agent of MECH products in Saudi Arabia
Store Request a quote

MECH Water Flow Indicator UL/FM MODEL ZSJZYS

Model ZSJZYS

Connection ends
AWWA C606
Working pressure
363 / 300 PSI (200 / 250 PSI on request)
Temperature
0 – 68 °C
Coating
FBE — ANSI/AWWA C550
Electrical rating
125/250 VAC 5A, 24/30 VDC 3A
Min. flow for alarm
4 – 10 gpm
Approvals
UL / FM / CSFM (10" not UL/FM)
Sizes
2" – 10" (DN50 – DN250)
Request a quote for this product
Or buy from the online store
SIZES & DIMENSIONS

Sizes & dimensions

SizeDNR Pipe OD (mm)A ±1.5 (mm)B (mm)C ±1.5 (mm)D (mm)E ±3 (mm)Hole dia. +1.6/0 (mm)Certificate
2"DN5060.31161006314083.530UL/FM
2.5"DN65731201006314083.530UL/FM
2.5"DN6576.11221006314083.530UL/FM
3"DN8088.9145100631409451UL/FM
4"DN100114.31851006314094.551UL/FM
5"DN125139.72121006314094.551UL/FM
5"DN125141.32121006314094.551UL/FM
6"DN150165.1254100631409551UL/FM
6"DN150168.3254100631409551UL/FM
8"DN200219.1298100631409551UL/FM
10"DN250273.03811006314097.570—
PROJECT APPROVALS

Approved on projects

98 projects and 61 owners approved this product or its family through the project consultants.

and 86 more projects.

Original approval letters are provided on request with your submittal.

The MECH water flow indicator ul/fm, model ZSJZYS, sizes 2″ – 10″ (DN50 – DN250), working pressure 363 / 300 PSI (200 / 250 PSI on request), UL / FM / CSFM (10″ not UL/FM) approved. It signals an alarm when water flows in a branch or floor of a sprinkler system. This guide explains what it does and how it works, related models, technical data, the critical point in selection and installation, and common mistakes. For more, read the guide water flow indicators.

At a glance

  • A flow indicator has a paddle that enters the pipe through a hole in its wall.
  • Sizes 2″ – 10″ (DN50 – DN250).
  • Working pressure 363 / 300 PSI (200 / 250 PSI on request).
  • Approvals: UL / FM / CSFM (10″ not UL/FM).
  • Connection: AWWA C606.
  • Operating temperature: 0 – 68 °C.

Water flow indicator: what it does and how it works

A flow indicator has a paddle that enters the pipe through a hole in its wall. When water flows the paddle deflects and operates a switch after an adjustable delay that prevents alarms from pressure surges, so the panel knows the floor or zone with flow.

Per the product data it operates at 4 – 10 gpm.

Technical data

Specification of model ZSJZYS
ItemSpecification
Connection endsAWWA C606
Working pressure363 / 300 PSI (200 / 250 PSI on request)
Temperature0 – 68 °C
CoatingFBE — ANSI/AWWA C550
Electrical rating125/250 VAC 5A, 24/30 VDC 3A
Min. flow for alarm4 – 10 gpm
ApprovalsUL / FM / CSFM (10″ not UL/FM)
Sizes2″ – 10″ (DN50 – DN250)

Dimensions for every size are in the size table at the top of the page.

Hole and spacing

Drill the pipe to the diameter on the datasheet and mount the indicator on a straight run away from elbows and valves by the recommended distance, with the arrow in the direction of flow.

Caution

Do not set the delay to zero; it causes false alarms from pressure surges.

Installation steps

  1. Drill the pipe to the stated diameter and deburr.
  2. Insert the paddle carefully without bending it, and fix the saddle around the pipe.
  3. Set the delay and wire it.
  4. Test the alarm by opening the zone test valve.

Common mistakes

  • Fitting it close to an elbow or valve.
  • Bending the paddle during installation.
  • Setting the delay to zero.

Files and ordering

On this page: Product datasheet, MECH Fire Protection Valves Catalogue (UL/FM). Add the product to your request list with size and quantity and we send a quotation, or build a submittal PDF for the consultant. Fu-Mech is the exclusive MECH agent in Saudi Arabia.

Frequently asked questions

Why is there a delay?

To prevent alarms from short pressure surges. See water flow indicators.

Where is it installed?

On the feed to each floor or zone, after the control valve.

What is the working pressure of model ZSJZYS?

363 / 300 PSI (200 / 250 PSI on request) per the product data. The pressure for each size or listed model is in the size table and datasheet.

What approvals does it carry?

UL / FM / CSFM (10″ not UL/FM) per the product data. Check the size and listed model in the approval listings, and see how to verify UL and FM approvals.

What end connection does it have?

AWWA C606. Choose the connection that matches the adjacent pipe and fittings.

References

  • AWWA C606 — Grooved and Shouldered Joints
  • AWWA C550 — Protective Interior Coatings for Valves and Hydrants
  • MECH catalogue — Product datasheet

This guide is general information to help with selection. Figures come from the product data on this page and the MECH catalogue; final design is by the project’s approved designer to the applicable standards and the project specification.