Skip to content
Exclusive agent of MECH products in Saudi Arabia
Store Request a quote

MECH WAFER BUTTERFLY VALVE BLUE | Model: D371X205

National Water Company logo
Approved by the National Water Company Butterfly valves — sizes 75 – 2800 mm · Certificate 2026-37271-02 · valid to Nov 2028
View certificate

Model D371X205

Design standard
MSS SP-67
Face to face
ISO 5752 Series 20
Top flange
ISO 5211
Connection ends
ASME B16.1 CL125, ASME B16.5 CL150
Working pressure
300 PSI
Temperature
0 – 80 °C
Coating
FBE — ANSI/AWWA C550
Sizes
2" – 24" (DN50 – DN600)
Request a quote for this product
Or buy from the online store
SIZES & DIMENSIONS

Sizes & dimensions

SizeDNA (mm)B (mm)C (mm)φD (mm)φD1 (mm)N-Øφ2 (mm)V (mm)GISO 5211L Length (mm)φ3 (mm)
2"DN50140.564.54353.9120.74-φ1914329.53F05132200
2.5"DN65153724665.2139.74-φ1914329.53F05132200
3"DN80157.5864679.7152.44-φ1914329.53F05132200
4"DN10017610052105190.58-φ19163211.4F05132200
5"DN12519111256130215.98-φ23163211.4F07132200
6"DN150202.512856156241.38-φ23203212.7F07132200
8"DN200243.516260206.7298.58-φ23264520.6F10225290
10"DN25027319468253.336212-φ25264520.6F10225290
12"DN30031122378301.9431.812-φ25284522.1F10215290
14"DN35034026778333.9476.312-φ28.531.64822.1F12215290
16"DN400400320102389.6539.816-φ28.533.24827F14270410
18"DN450422345114441577.916-φ3238.14827F14270410
20"DN500480380127492.463520-φ3241.270.2-F16318410
24"DN600562441154592.8749.320-φ3550.670.2-F16333410
PROJECT APPROVALS

Approved on projects

17 projects and 11 owners approved this product or its family through the project consultants.

and 5 more projects.

Original approval letters are provided on request with your submittal.

The MECH wafer butterfly valve blue, model D371X205, sizes 2″ – 24″ (DN50 – DN600), working pressure 300 PSI. A lever-operated butterfly valve for water networks and general services. This guide explains what it does and how it works, related models, technical data, the critical point in selection and installation, and common mistakes. For more, read the guide butterfly valves in fire protection.

At a glance

  • A butterfly valve controls flow with a disc that rotates on a shaft inside the body: parallel to the flow when open, across it when closed.
  • Sizes 2″ – 24″ (DN50 – DN600).
  • Working pressure 300 PSI.
  • Connection: ASME B16.1 CL125, ASME B16.5 CL150.
  • Operating temperature: 0 – 80 °C.

Butterfly valve: what it does and how it works

A butterfly valve controls flow with a disc that rotates on a shaft inside the body: parallel to the flow when open, across it when closed. It is driven by a handwheel gear operator so it closes slowly, with an indicator showing its position (open / shut).

This model is for water, HVAC and general services (blue), operated by a lever that locks in several open positions. Its top flange is to ISO 5211, so an actuator can be fitted when needed.

Related models

butterfly valve family
ModelProductSizesPressureApprovals
D71X4BUTTERFLY VALVE FLANGED LEVER1.5″ – 32″ (DN40 – DN800)300 PSI—
D371X205 — this productWAFER BUTTERFLY VALVE BLUE2″ – 24″ (DN50 – DN600)300 PSI—

Technical data

Specification of model D371X205
ItemSpecification
Design standardMSS SP-67
Face to faceISO 5752 Series 20
Top flangeISO 5211
Connection endsASME B16.1 CL125, ASME B16.5 CL150
Working pressure300 PSI
Temperature0 – 80 °C
CoatingFBE — ANSI/AWWA C550
Sizes2″ – 24″ (DN50 – DN600)

Dimensions for every size are in the size table at the top of the page.

Disc clearance when open

When open, the disc projects beyond the body on both sides. Fitted directly against a check valve, strainer or narrow fitting it may strike it and not open fully. Check the disc dimensions on the datasheet and add a spacer where needed.

Caution

Close the valve slowly to avoid water hammer on large lines.

Installation steps

  1. Check the end type (wafer, grooved or threaded) and flange standard match the line.
  2. Open the valve slightly before fitting so the seat is not damaged, then install between flanges or with grooved couplings as applicable.
  3. Check disc clearance with adjacent fittings, then cycle the valve fully open and shut after installation.

Common mistakes

  • Fitting it against a component the disc strikes.
  • Tightening flange bolts with the valve fully shut, damaging the seat.
  • Slamming it shut on a large line, causing water hammer.

Files and ordering

On this page: Product datasheet, MECH Water Valves Catalogue, Material Safety Data Sheet (MSDS). Add the product to your request list with size and quantity and we send a quotation, or build a submittal PDF for the consultant. Fu-Mech is the exclusive MECH agent in Saudi Arabia.

Frequently asked questions

Why is it gear-operated?

Fast closure causes water hammer, and standards require indicating control valves to close slowly. The gear operator slows the movement and shows the position.

Can an electric actuator be fitted?

Yes, the top flange is to ISO 5211 and takes standard actuators.

What is the working pressure of model D371X205?

300 PSI per the product data. The pressure for each size or listed model is in the size table and datasheet.

What end connection does it have?

ASME B16.1 CL125, ASME B16.5 CL150. Choose the connection that matches the adjacent pipe and fittings.

References

  • ASME B16.1 — Gray Iron Pipe Flanges and Flanged Fittings
  • ASME B16.5 — Pipe Flanges and Flanged Fittings
  • MSS SP-67 — Butterfly Valves
  • AWWA C550 — Protective Interior Coatings for Valves and Hydrants
  • ISO 5211 — Industrial valves — Part-turn actuator attachments
  • ISO 5752 — Metal valves for use in flanged pipe systems — Face-to-face and centre-to-face dimensions
  • MECH catalogue — Fire fighting valves

This guide is general information to help with selection. Figures come from the product data on this page and the MECH catalogue; final design is by the project’s approved designer to the applicable standards and the project specification.