Skip to content
Exclusive agent of MECH products in Saudi Arabia
Store Request a quote

Pipe Hanger Clamps and supports

Request a quote for this product
Or buy from the online store
Certificates & approvals

Ask us for this product's certificates.

PROJECT APPROVALS

Approved on projects

21 projects and 16 owners approved this product or its family through the project consultants.

and 9 more projects.

Original approval letters are provided on request with your submittal.

The MECH pipe hanger clamps and supports, UL / cUL listed and FM approved for selected types and sizes (see catalogue) approved. Hanging and supporting sprinkler and water lines with the right types and spacing. This guide explains what it does and how it works, related models, technical data, the critical point in selection and installation, and common mistakes.

At a glance

  • Pipe hangers carry the weight of the line and its water and hold it in place.
  • Approvals: UL / cUL listed and FM approved for selected types and sizes (see catalogue).

Pipe hangers and clamps: what it does and how it works

Pipe hangers carry the weight of the line and its water and hold it in place. The MECH range includes band / ring hangers for horizontal lines, clevis hangers, riser clamps and beam clamps, made of carbon steel, electro-galvanized or hot-dip galvanized.

Per the MECH catalogue some types are UL / cUL listed and FM approved for set sizes, following MSS SP-69.

Technical data

Specification of the product
ItemSpecification
MaterialCarbon steel
FinishElectro-galvanized or hot-dip galvanized
TypesBand / ring hangers, clevis hangers, riser clamps, beam clamps
ApprovalsUL / cUL listed and FM approved for selected types and sizes (see catalogue)
StandardMSS SP-69

Type and spacing

Hanger type, size and spacing are set by NFPA 13 according to pipe size and type. Specify type, size and finish when ordering.

Caution

This page is an initial overview of the range; send us your list of types and sizes and we confirm the approved models.

Installation steps

  1. Choose the right hanger for each line (horizontal, riser, beam).
  2. Keep within the maximum hanger spacing in NFPA 13.
  3. Use rods and anchors rated for the load.
  4. Add a hanger close to each change of direction and concentrated load.

Common mistakes

  • Hanger spacing beyond the limit.
  • A hanger that does not suit the pipe size.
  • Fixing to a structural member that cannot take the load.

Files and ordering

On this page: MECH Pipe Hangers & Supports Catalogue. Add the product to your request list with size and quantity and we send a quotation, or build a submittal PDF for the consultant. Fu-Mech is the exclusive MECH agent in Saudi Arabia.

Frequently asked questions

Are the hangers approved?

Some types are UL / FM approved for set sizes per the catalogue; specify the types and we confirm.

Which finishes are available?

Electro-galvanized or hot-dip galvanized depending on type.

What approvals does it carry?

UL / cUL listed and FM approved for selected types and sizes (see catalogue) per the product data. Check the size and listed model in the approval listings, and see how to verify UL and FM approvals.

References

  • MSS SP-69 — Pipe Hangers and Supports — Selection and Application
  • MECH catalogue — Product datasheet

This guide is general information to help with selection. Figures come from the product data on this page and the MECH catalogue; final design is by the project’s approved designer to the applicable standards and the project specification.